Pumps, separator, heat exchanger, motors

• Self-Priming pumps:

Vacuum prime assist pumps

prime Vacuum assist pumps deliver extreme flows up to 10,000 m3/h

With high head capability up to 210 meters and utilize the priming system with solid handling capability up to 760 mm

This advanced system is capable of rapid (50 CFM ) unattended priming and run –dry operation for the Ultimate in remote operation

• Standard self- Priming pumps:

Designed for reliable solids and clear liquids handling after initial Priming , they continue to re-prime automatically

• LIQUID RING Vacuum pumps

Single –stage or two stage design for handling of gases and vapors with suction volume flow up to 10,700 m3/h  and suction pressure up to 33 m bar

• LIQUID RING compressors

Single –stage or multi-stage design for handling of gases and vapors suction with volume flow up to 10,500m3/h and discharge pressure up to 11 bar

• Metering pumps

The innovative and universal metering pumps with diaphragm protection system flow rates up to 19 m3/h, Discharge pressure up to 1200 bar

• Triplex pumps

High pressure process Diaphragm pumps with mono block drive design flow rates up to 180 m3/h, discharge pressures up to 1200 bar

• Plunger pumps

Pressure up to 3500 Bars , volumetric flow up to 140m3/h temperature up to 200C ,Viscosity up to 2000 MPAs

Our side channel pumps can handle high volumes of gas and are self-priming, guaranteeing a high level of process safety in the most varied of process oriented cycles

Side channel pumps can evacuate a suction pipe and can prime the medium for suction independently depending on the integrated positive dis placement unit, it is possible to

Handle gas contents of up to 50%

With experience in various applications, especially in handling abrasive and corrosive liquids, we provide you with the security of a well-approved wide range of pumps made of metal, plastic and ceramic pumps

Area of application:

Applications for the chemical Industry ,fertilizer production ,pickling plants for steel and stainless steel the Petrochemical industry ,Galvanizing plants ,pharmaceutical processing ,Biotechnological processing ,water and waste water treatment ,crystallization of salts ,waste acids re-concentration ,sulphurization plant, bleaching plant ,pumping of molten salts ,gas scrubbing plant and paints

Reliable and easy to maintain: only two moving parts

Adjustable end clearance, for low or high viscosities, high temperatures, or to compensate for wear over time

Max.Capacity  : to 1,600 GPM (365M3/H))

Max .pressure  to 250 psi (17 bar )

Viscosity Range : 28 to 20,000,000 SSU (1 to 440,000 Cst )

Temperature Range : -120˚ F to +800˚F (-85˚ C to +430˚C)

The pumps can be supplied as well acc.To API 676 Standard

Have a very broad application range and are used in all industry branches for the continuous ,pressure –stable ,gentle and low-pulsation conveyance of almost any substance one advantage for the operator is that such a valve less positive –displacement pump is also capable of transporting stringy materials safely .whether for sludge ,chemical substances ,adhesives,petroleum or yogurt,one of the eleven pump types offered by our principal in four rotor /stator geometries will definitely suit your application .contact us and we will be happy to help you select the one suited best to your needs

Only in very rare cases, crude oils arrives at the surface in pure form. Usually it is mixed with water, sand and gas conventional pumps require that the gas is separated from the crude oil first with PC Multiphase pumps, this is not an issue

PC Multiphase pumps can be used for crude oil with a gas content of up to 100%

Industrial rotary lobe pumps are very versatile stand-alone equipment. They are used primarily in environmental technology and the chemical industry for continuous and gentle conveyance of almost any substance while dosing in proportion to rotation speed. Their low space requirements and high power density are some of their most important advantages. The RLP Mobile, rotary lobe pump mounted onto a trailer, is ideal for use in any disaster situation.

Multi screw pump (msp ) has a superior quality to meet the demands of high standards of our customers

Two ,three and four “twin “screw pumps cover a wide range of applications for the oil & gas ,Marine ,power and general industry

The pumps are designed to work with low to high lubricant fluids ,low to high viscosity ,shear sensitive and/or chemically aggressive media

The pumps are hydraulically balanced with high suction power (up to 8 m.a.s.i),and quiet operation as well as continuous flow without pulsation “without turbulence “ ,accordingly no foaming ,low maintenance ,low lifecycle cost ,long lifetime in service with the hydrodynamic bearings

1. Chemical injection packages

Corrosion inhibitor, methanol injection ,glycol injection,and other chemicals injection with performance range covering flows up to 180 m3/h (45,000 GPH) and pressures up to 1,200 BAR (17,000 PSI )

1. Metering systems

Metering systems are modular combinations of a pump plus an adjusting element, flow meter (volume- or mass-flow), and controller. The metered flow is controlled by a closed control loop.

Custom engineered ,expertly built metering pumps and packages complete ,ready –to-use solutions for your specific application

1. Odorizing Systems:

• for all sorts of gases
• Applicable for all current odorants
• Standard and customized solutions for odorization
• Economical odorizing systems thanks to modular  design Worldwide support and service

Motor and Drive

We are offering a wide range for high and low voltage machines (electric motors, variable speed  drives ,generators and soft starters ,designed and manufactured by a large network of worldwide manufacturers (10% world market share ):

• Product range extends from 25 w to 25 MW and includes standard solutions ,customized solutions and de sign-to –order solutions including complete drive system for a wide range of applications
• Med &high voltage explosion proof /safe area motors
• Low start current motor (as low as 250 % rated current
• Low voltage high speed motor /military and automobile test bench
• Vibration motors

MV soft –starters & variable speed drives

Starting from 160 kw up to 120 mw at 3 kv up to 13.8 kv for the following applications

• Specialized power drive systems
• Engineered high power drives
• Test Benches
• Synchronous motors
• As Synchronous motors

Reciprocating Compressors for Process Gases

Reciprocating compressors are of modular design and meet the recommendations of the API 618, a set of regulations by the American Petroleum Institute.

They are offered dry running or with cylinder lubrication. The maximum number of cylinder axes is 6.

Operating Range:

Not only is a compressor we are delivering also:

The assembly and commissioning of the reciprocating compressors at site, the conversion and modernization of reciprocating compressors and the upgrading of control systems

Process Gases applications:

• Chemical and petrochemical industry
• Refinery technology
• Oil and gas industry
• Gas turbine power plants
• Production, transportation and storage of natural gas

Centrifugal Compressors for Process Gases

Dry running integrally geared centrifugal compressors, which are of modular design and satisfy the design guidelines of the applicable API recommendations (API 617, API 614).

The development is based on the latest research results in fluid mechanics as well as in gear and bearing design.

Power ranges:

Benefits compared to reciprocating compressors:

• Pulsation-free compressing of the medium
• Oil-free fluid

Typical application fields for process gases are:

• Chemical and petrochemical plants
• Flue gas and desulphurization plants
• Cooling processes in the metal and special steel production sector
• Biochemical plants
• Process technology procedures in various industrial operations